Steps for gift packaging

Gift Packaging Method (1) - Basic Binding Method for Bow Ties

No matter what item, even without packaging paper or boxes, it is not packed in a bag. As long as a ribbon is tied, it will instantly become an incredible gift. If a beautiful bow is tied, it will immediately add charm to the gift itself.

Bow tie method:

1. Tie a knot at both ends of the ribbon

2. Press the middle position with your hand and irregularly bend the right thread into a circle

3. Fold the ribbon on the left side up from above and press it down with the thumb of your right hand

4. Wrap around the top of the right ribbon loop and then pass through the loop formed by the left ribbon loop

5. The original ribbon ring on the right side is placed on the left side, and the ribbon passing through the circle formed by the left ribbon is tightened on the right side

6. Trim both ends of the ribbon to the desired shape, and the bow is complete

Gift Packaging Method (2) - Method of Tying a Flipped Bow

This is a bow tie method that uses both sides, with the front facing outward:

1. Tie the ribbon horizontally, with the front facing outward

2. Fold to petal size on the right side

3. The petals folded out on the left are longer than those on the right

4. As shown in the figure, cross left and right, with a hole left in the center

5. Long side piercing through the hole

6. Organize left and right to equal size

7. Cut the ribbon to the appropriate length according to the size of the bow, and you are done

Gift Packaging Method (3) - Basic Cross shaped Ribbon Tie Method

This is the most basic ribbon tying method. When the position of the cross changes, the emotions expressed by the gift also change. You can place the ribbon on a card or small item to experience the joy of the foundation. The cross shaped ribbon is very simple and can highlight the taste of the gift itself.

Tenfold system method

1. Prepare a ribbon that is 4 times longer than the total length, width, and height of the box, which is necessary for tying a bow

2. Firstly, leave the necessary length for tying a bow, and then wrap it vertically in a circle

3. Turn it to the middle part, cross the two ribbons and turn them horizontally, then wrap them around horizontally

4. Thread the originally reserved ribbon through as shown in the picture

5. Tie the ribbon that comes out from below into a knot and tie it tightly

6. In this way, the simple and beautiful bow is tied

Gift Packaging Method (4) - Basic Double Diagonal Ribbon System

This is a very charming ribbon tying method that can express the gift giver's taste. Except for simple crosses

Double oblique line system method

1. Prepare a ribbon that is three times longer than the length, width, and height of the box. Leave enough length for tying a bow

2. Tilt the ribbon as shown in the picture and place it properly

3. Pay attention to placing the diagonal ribbons in a flat line and then roll them up

4. Thread the left ribbon below the right ribbon

5. Tie a beautiful bow tie

6. In this way, the front and back sides form two parallel diagonal ribbons

Gift Packaging Method (5) - Basic V-shaped Ribbon System

The V-shaped system gives people a very beautiful, clear, and exquisite feeling. When giving gifts to people who love beauty, men, or elders, using them together can achieve a surprising effect

V-shaped system method

1. Prepare a ribbon that is 4 times longer than the total length, width, and height of the box

2. Leave the necessary length for tying the bow tie, as shown in the picture, and wrap it diagonally in a vertical direction

3. Make another diagonal turn in the longitudinal direction

4. Thread the original ribbon as shown in the picture and secure it

5. Bend the ribbon that comes out from below into a circular shape and tie a knot. This completes the beautiful V-shaped knot

Gift Packaging Method (6) - Basic Sugar Packaging Method

Packaging method for square shaped items using sugar cubes

1. Cut the packaging paper to a length of+2-3 centimeters around the box, and a width of+3 centimeters around the box. Place the bottom of the box facing up in the center of the paper

2. Fold the paper on the right side inward along the box, keeping the edges of the paper in the center of the box

3. Fold the paper on the left side inward again

4. Fix the overlap of the paper with transparent tape or double-sided tape

5. Fold the paper on both sides inward along the box

6. Fold the paper into a beautiful trapezoid in order

7. Gently mark the intersection of the upper and lower origami

8. Keep the markings parallel to the edges and fold the paper underneath

9. Fix the joint with double-sided tape or beautiful stickers, then wrap the other side, flip it over to the front of the box, and decorate it with ribbon or flowers to complete the task